C80 vs C98 vs C125 Steel Strip Grades | BTC Strips

C80 vs C98 vs C125: Which High-Carbon Steel Strip Grade?
All three grades sit on the same CRCA high-carbon page and share the same supply form. What differs is composition: carbon rises from C80 to C98 to C125, while silicon and manganese shift slightly. This post compares only what BTC Precision Strips actually publishes for the three grades. Where the site does not publish a per-grade figure — mechanical properties, equivalent grades, delivery time — that is stated as a gap, not filled in.
High carbon steels contain from 0.80 to 1.25% C with manganese ranging from 0.5% to 0.9%, according to the CRCA high-carbon page. They are commonly known as spring steel, generally operated at very high stresses and heat-treated to obtain the maximum elastic limits and fatigue resistance. Note: C125's carbon (1.10–1.30%) sits partly above the 1.25% upper bound in that family definition — that is the site's own wording.
At a glance (verified from the CRCA high-carbon page)
Grade | Also listed as | %C | %Si | %Mn | %S / %P | Thickness | Width | Finish / form
C80 | C-80 | 0.75–0.85 | 0.10–0.35 | 0.50–0.80 | ≤0.05 / ≤0.05 | 0.07–5.00 mm | 8–500 mm | Bright, coil
C98 | C100S / C-98 | 0.90–1.05 | 0.10–0.35 | 0.50–0.80 | ≤0.05 / ≤0.05 | 0.07–5.00 mm | 8–500 mm | Bright, coil
C125 | C125 / HC21 / 125CR1 | 1.10–1.30 | 0.10–0.25 | 0.30–0.60 | ≤0.05 / ≤0.05 | 0.07–5.00 mm | 8–500 mm | Bright, coil
What is the same for all three (CRCA high-carbon family)
Thickness 0.07–5.00 mm; width 8–500 mm (below 0.6 mm thickness, 4 mm wide material can be supplied). Hardness: fully annealed material with a maximum hardness of 200 VPN; special temper material 230–270 VPN. Bright surface finish; coil form; special I.D. & O.D. requirements can be maintained; cut lengths on request. Standards: EN 10132-4, DIN 17222, ASTM A684. Thickness tolerance within ±0.005 mm; precision slit width tolerance within ±0.02 mm. Every production batch undergoes metallurgical lab inspection (surface decarburization, microstructural grain size, flatness). Full mill test certificates (MTC) with chemical element analysis are supplied with every dispatch. Export packaging: coils treated with rust-inhibitive oil, wrapped in VCI paper, encased in high-density polyethylene, strapped to heat-treated wooden pallets.
What differs — and what it does not prove
The verified difference is carbon content: C80 (0.75–0.85%) < C98 (0.90–1.05%) < C125 (1.10–1.30%). Silicon narrows slightly for C125 (0.10–0.25% vs 0.10–0.35%), and manganese is lower for C125 (0.30–0.60% vs 0.50–0.80%). Do not claim one grade is harder, stronger, or better for a specific application than the others on composition alone: no per-grade mechanical properties (yield strength, tensile strength, elongation, bend test) are published for C80, C98 or C125. The applications below are for the high-carbon family as a whole — confirm per grade before attributing any single application to a single grade: surgical blades (scalpels); metal cutting band saw blades & hack saw blades; knives for cutting foam & plastics; circlips & hanger clips; textile needles; automobile components & agricultural tools.
How to choose — questions to send with the enquiry
Grade and condition — CRCA annealed, or special temper (230–270 VPN)?
Thickness and width — within 0.07–5.00 mm / 8–500 mm, and the tolerance needed (±0.005 mm / ±0.02 mm are the site-wide figures).
Hardness required, and whether the strip will be heat-treated after forming.
Edge, coil ID / OD, and cut lengths if needed.
Application — so engineering can confirm which of the family applications actually applies to the chosen grade, and supply the MTC with the dispatch.
Enquiry
Get a custom quote for your specific requirements. Our engineering team is ready to assist with material selection and technical specifications. Enquiry: https://btstrips.com/enquiry. Email: info@btstrips.com. Phone: +91 85849 48988. Head office: 21A, Canning Street, Ground Floor, Kolkata – 700001, West Bengal, India. Hours: Mon–Fri 10:00 AM – 7:00 PM IST; Saturday 10:00 AM – 5:00 PM IST.

BTC Admin
Metallurgy Specialist
Precision steel strip specialists and metallurgists at BTC Precision Strips, delivering precision cold rolled and hardened tempered steel solutions since 1958.
