A test of hardness, usually by determining the resistance of the material to indentation under standard conditions.
A test to determine hardness by pressing a hard steel ball of known diameter under a standard load into the surface of the material and measuring the diameter of the indentation produced. The Brinell hardness number, BHN = Load in kg / Spherical area of impression in sq. mm.
Determines hardness by indicating on a dial the depth of the impression caused by a loaded indenter in the form of either a diamond cone (Scales A and C) or a hardened steel ball (Scale B). When the load is removed, the dial gauge records the depth of impression in terms of Rockwell numbers.
When the Brinell test is used on very hard materials, low values result owing to the spherical shape of the indenter and flattening of the ball. These are eliminated by using a square-based diamond pyramid indenter which does not deform easily and gives geometrically similar impressions under various loads. The diamond pyramid with an angle between opposite faces of 136 degrees is pressed under a standard load into the surface of the material, and the diagonal of the indentation produced is measured. The load divided by the contact area of the impression gives the Vickers Pyramid Number. VPN = Load in kg / Pyramidal area of impression in sq. mm.
Explore our technical documentation and engineering data.
