Steel Strip Sizes & Tolerances Explained | BTC Strips

Intro: When buyers enquire about steel strip, the first numbers they give are thickness and width — and the first question back is usually about tolerance. This post sets out the sizes BTC Precision Strips stocks, the tolerances it works to, and what those numbers mean when you specify a strip. Every figure below is from btstrips.com; nothing here is a general industry figure presented as a BTC one.
Thickness and width, CRCA high-carbon family: The cold-rolled high-carbon family — including C80, C98 and C125 — is stocked in thickness from 0.07 mm to 5.00 mm and width from 8 mm to 500 mm, as published on the CRCA high-carbon product page. In thickness lower than 0.6 mm, 4 mm wide material can be supplied. Other families differ: for 50CrV4, the hardened and tempered page publishes 0.05 mm to 4.00 mm and the low-alloyed page 0.50 mm to 5.00 mm. Do not apply one family's range to another — check the range on the product page for the family you need, or ask in the enquiry.
Tolerances: BTC works to a thickness tolerance of ±0.005 mm and a slit width tolerance of ±0.02 mm. Those are the figures stated across the site, including the homepage and the manufacturing capabilities page. A tolerance is the allowed variation from the nominal size — a strip ordered at 1.00 mm thick is supplied within 0.005 mm of that figure. The manufacturing page also states precision slitting from 4 mm to 600 mm. If your application needs a tighter tolerance than the published figures, say so in the enquiry rather than assuming it — this post does not invent a tighter figure.
How to specify a strip: Give the grade, the condition (cold-rolled or hardened and tempered), the thickness, the width, and the standard you need it to — EN 10132-4, DIN 17222 or ASTM A684, the three standards BTC cites. The mill test certificate supplied with every dispatch records the actual figures for the coil you receive, so the specification and the certificate can be checked against each other. For the grades themselves, the C80 vs C98 vs C125 post compares the three high-carbon grades, and the hardness post explains the HRC and HV figures the hardened and tempered grades are specified to.
Enquiry CTA: Get a custom quote for your specific requirements. Our engineering team is ready to assist with material selection and technical specifications. Enquiry: /enquiry. Email: info@btstrips.com. Phone: +91 85849 48988.

BTC Admin
Metallurgy Specialist
Precision steel strip specialists and metallurgists at BTC Precision Strips, delivering precision cold rolled and hardened tempered steel solutions since 1958.
