Brinell, Rockwell & Vickers Hardness Explained | BTC Strips

Intro: Hardness is how the hardened and tempered steel strip grades on btstrips.com are actually specified — each grade is delivered pre-hardened to a stated Rockwell range — and it is also the question behind the site's most-seen page. The steel hardness conversion tool at /tools/steel-hardness-conversion gets 776 impressions, 54 percent of the whole site, at position 78.8 with 0 clicks, mostly for "brinell to rockwell" type queries. This post explains the three scales that tool converts between, what each one reports, and which grades they apply to. It quotes no conversion values of its own: for a conversion, use the tool page, which renders the full 172-row table and now carries a five-question FAQ.
What each scale measures: Brinell hardness is reported as HB, Rockwell hardness as HRC, and Vickers hardness as HV. They are three different scales for the same property, and a number on one scale is not the same number on another — 50 HRC is not 50 HB and not 50 HV. That is why a conversion table is needed at all, and why this post does not compare a figure from one scale directly with a figure from another as if they were the same measurement. The hardened and tempered grades below are specified in HRC, with an HV figure published alongside. The cold-rolled grades are specified differently again, as set out in the section below.
Hardness of the hardened and tempered grades, H and T condition only: The figures below are from the hardened and tempered page on btstrips.com, as used in post 2. They apply to these grades in the hardened and tempered condition only. Do not apply them to the same grades in the cold-rolled condition. C55S: 40 to 48 HRC, 390 to 485 HV, tensile strength 1250 to 1550 MPa. C67S: 42 to 50 HRC, 415 to 510 HV, tensile strength 1300 to 1600 MPa. C75S: 44 to 52 HRC, 430 to 540 HV, tensile strength 1400 to 1700 MPa. C100S: 46 to 54 HRC, 460 to 580 HV, tensile strength 1450 to 1800 MPa. 50CrV4: 44 to 52 HRC, 430 to 540 HV, tensile strength 1400 to 1750 MPa. The hardened and tempered family as a whole is delivered pre-hardened to a stated HRC range of 30 to 58 HRC. The homepage FAQ gives a general figure of HRC 42 to 52 — do not apply that general figure to any single grade where a grade figure above exists. Do not publish C75 as "C-80": the hardened and tempered page aliases C75S as "C-80" while the CRCA high-carbon page lists C-80 as a separate grade, and that identity is unsettled in engineering issue 10, question 4.
How to convert between the scales: Use the steel hardness conversion tool at /tools/steel-hardness-conversion. It converts between Brinell, Rockwell and Vickers, and it renders the full conversion table. The tool page itself states the table covers tensile strength from 28 to 270 kg/mm², Brinell hardness from 78 to 750 HB, and Vickers hardness from 78 to 839 HV, with Rockwell in both HRB and HRC — that range summary is the only conversion figure quoted in this post. This post does not reproduce that table — a second copy would be duplicate content — and it does not invent conversion values. If a buyer needs a single converted figure, the tool page is the place to get it, and its FAQ answers the common conversion questions from the same table.
Which scale for which question: Ask first which condition the strip is in. For hardened and tempered strip, the published figures are HRC with HV alongside, as in the table above. For cold-rolled strip, the published figures are Vickers: the CRCA grades publish VPN, annealed maximum 200 VPN and special temper 230 to 270 VPN, for the high-carbon family only. Do not compare those VPN figures directly with HRC or HV figures as if they were the same scale, and do not apply the cold-rolled VPN figures to hardened and tempered strip or the other way round.
Enquiry CTA: Get a custom quote for your specific requirements. Our engineering team is ready to assist with material selection and technical specifications. Enquiry: /enquiry. Email: info@btstrips.com. Phone: +91 85849 48988.

BTC Admin
Metallurgy Specialist
Precision steel strip specialists and metallurgists at BTC Precision Strips, delivering precision cold rolled and hardened tempered steel solutions since 1958.
